RESEARCH SAVING SPINDLE UNIT BEARINGS FOR LATHE MACHINES
Keywords:
Experimental tests were conducted on rolling bearing-supported spindles, focusing on centrifugal force, vibration, and temperature rise for different bearing materials (Si₃N₄ ceramic vs. steel). These experiments were performed to evaluate bearing performance under high-speed conditions, verify their suitability for high-speed and high-precision machining, and guide the selection of optimal bearing types for motorized spindles.Abstract
The spindle unit is a critical component of machine tools, directlyinfluencing performance, energy efficiency, and operational reliability. This review and analysis consolidate recent advances in spindle technology, focusing on condition monitoring, fault diagnosis, structural optimization, and energy-efficient design. Techniques such as vibration monitoring, acoustic emission, shock pulse method, and surface roughness measurement have been successfully applied for fault detection. Studies highlight innovations in motorized spindle bearing systems, lubrication strategies, preload optimization, thermal error control, and intelligent
diagnostic methods. Analytical and experimental investigations, including multisupport spindle models and ultra-precision lathe designs, demonstrate enhanced structural rigidity, machining accuracy, and energy performance. Moreover, sustainable approaches integrating condition monitoring, remanufacturing, and advanced product-service systems offer potential economic and operational benefits. The findings provide comprehensive insights for the development of highperformance, energy-efficient, and reliable spindle systems in modern machine tools.
References
[1] Saravanan, S., Yadava, G.S. & Rao, P.V. Condition monitoring studies on
spindle bearing of a lathe. Int J Adv Manuf Technol 28, 993–1005 (2006).
https://doi.org/10.1007/s00170-004-2449-0
[2] Xie, P., Zhang, Z., Liao, H. et al. Industrial motorized spindle systems:
challenges and trends in bearing, thermal, and fault diagnosis. Int J Adv Manuf
Technol (2025). https://doi.org/10.1007/s00170-025-16905-w
[3] Abele, E., Sielaff, T., Schiffler, A., Rothenbücher, S. (2011). Analyzing Energy
Consumption of Machine Tool Spindle Units and Identification of Potential for
Improvements of Efficiency. In: Hesselbach, J., Herrmann, C. (eds) Glocalized
Solutions for Sustainability in Manufacturing. Springer, Berlin, Heidelberg.
https://doi.org/10.1007/978-3-642-19692-8-49
[4] Xie, P., Zhang, Z., Liao, H. et al. Industrial motorized spindle systems:
challenges and trends in bearing, thermal, and fault diagnosis. Int J Adv Manuf
Technol (2025). https://doi.org/10.1007/s00170-025-16905-w
[5] Y. Lv, C. Li, Y. Tang, X. Chen and X. Zhao, "Towards Lightweight Spindle of
CNC Lathe Using Structural Optimization Design for Energy Saving," 2020 IEEE
16th International Conference on Automation Science and Engineering (CASE),
Hong Kong, China, 2020, pp. 220-225, doi: 10.1109/CASE48305.2020.9216976.
[6] Krol, O., Sokolov, V. (2021). Research of the Spindle Units for
Multioperational Lathes in the APM WinMachine Environment. In: Ivanov, V.,
Trojanowska, J., Pavlenko, I., Zajac, J., Peraković, D. (eds) Advances in Design,
Simulation and Manufacturing IV. DSMIE 2021. Lecture Notes in Mechanical
Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-77719-7_5
[7] Proceedings Volume 9283, 7th International Symposium on Advanced Optical
Manufacturing and Testing Technologies: Design, Manufacturing, and Testing of
Micro- and Nano-Optical Devices and Systems; 92830I
(2014) https://doi.org/10.1117/12.2070005[8] Denkena, B., Bergmann, B. & Klemme, H. Cooling of motor spindles—a
review. Int J Adv Manuf Technol 110, 3273–3294 (2020).
https://doi.org/10.1007/s00170-020-06069-0
[9] Du, Y., He, G., Li, B. et al. In-service machine tool remanufacturing: a
sustainable resource-saving and high-valued recovery approach. Environ Dev
Sustain 24, 1335–1358 (2022). https://doi.org/10.1007/s10668-021-01499-6
[10] Mitin, E.V., Sul’din, S.P. Static and Dynamic Spindle Characteristics in
Lathes with Different Roller Bearing Configurations. Russ. Engin. Res. 43, 577–
580 (2023). https://doi.org/10.3103/S1068798X23050271