OPTIMIZATION OF THE SAFETY SYSTEM FOR AUTOMOTIVE COMPONENT PRESSING PROCESS AT "UZ SAEMYUNG CO" ENTERPRISE

Authors

  • Javoxir Nematjonov Author

Keywords:

press safety, optimization, Safety PLC, light curtain, two-hand control, hydraulic pressure sensor, emergency stop, SCADA, EN ISO 13849, "Uz Saemyung Co"

Abstract

This thesis examines the optimization of the safety system for the automotive component pressing process at the "Uz Saemyung Co" enterprise. The shortcomings of the existing safety system are analyzed and five main optimization directions are proposed: upgrading protective devices (safety light curtains, two-hand control modules), implementing Safety PLC controllers, installing hydraulic pressure and position sensors, modernizing the emergency stop system on the Fail-Safe principle, and deploying a SCADA monitoring platform. Research demonstrates that the comprehensive implementation of these devices brings the safety level to PLd standard according to EN ISO 13849-1, reduces workplace injury risk significantly, and improves production efficiency.

References

1. Pilz GmbH. Safety in Pressing Operations – Technical Guide. – Germany, 2023. – 96 p.

2. EN ISO 13849-1:2015. Safety of machinery – Safety-related parts of control systems.

3. Bolton W. Programmable Logic Controllers. – 7th Edition. Elsevier, 2021. – 380 p.

4. Lozynskyy O., Paranchuk Ya. Optimization of Industrial Safety Control Systems. – Electrotechnic and Electronic Engineering, 2021. – Vol. 14. – P. 28–35.

5. IEC 61496-1:2020. Safety of machinery – Electro-sensitive protective equipment.

6. IEC 60947-5-5:2005. Low-voltage switchgear – Emergency stop devices.

7. Karimov Q.X. Fundamentals of Industrial Automation. – Tashkent: O'qituvchi, 2021. – 256 p.

Indicator

Before optimization

After optimization

Safety level (EN ISO 13849)

PLb

PLd / PLe

Danger zone detection

None

Light curtain <10 ms

Fail-Safe principle

No

Yes (Safety PLC + E-Stop)

Hydraulic pressure control

Manual check

Automatic 0–400 bar

Event archiving

No

SCADA — full audit trail

Estimated injury risk reduction

Baseline

Up to 85%

Published

2026-06-03