AUTOMATION OF THE TECHNICAL WASTEWATER TREATMENT PROCESS IN DYEING WORKSHOP

Authors

  • Sardorbek Sadullayev Author

Keywords:

dyeing workshop, wastewater automation, pH control, PLC, SCADA, PID dosing, COD sensor, reagent optimization, Siemens S7-1500

Abstract

This thesis examines the automation of the wastewater treatment process in a dyeing workshop. Unlike the design-focused approach, this work concentrates on the instrumentation and automation layer: pH, COD, dissolved oxygen and turbidity sensors, PLC-based control logic, dosing pump automation, and SCADA monitoring. A Siemens S7-1500 PLC with PID-controlled reagent dosing is proposed. Simulation in MATLAB/Simulink shows that the automated system maintains effluent pH within 6.5-8.5 with ±0.1 accuracy, reduces reagent overconsumption by 34%, saves 22% blower energy, and achieves >98% pollutant removal efficiency compared to 82-91% under manual control.

References

1. Metcalf & Eddy. Wastewater Engineering: Treatment and Resource Recovery. 5th Ed. McGraw-Hill, 2014.

2. Crini G., Lichtfouse E. Advantages and disadvantages of techniques used for wastewater treatment. Environmental Chemistry Letters, 2019. Vol. 17. P. 145-155.

3. Bolton W. Programmable Logic Controllers. 7th Edition. Elsevier, 2021.

4. Ogata K. Modern Control Engineering. 5th Edition. Pearson Education, 2020.

5. MathWorks. MATLAB/Simulink Control System Toolbox Documentation. 2023.

6. Siemens AG. SIMATIC S7-1500 System Manual. Nuremberg: Siemens, 2023.

7. Gunatilake S.K. Methods of Removing Heavy Metals from Industrial Wastewater. JMESS, 2015. Vol. 1. P. 12-18.

Indicator

Manual control

Automated (PLC+PID)

pH accuracy (final effluent)

6.0-9.8 (variable)

6.5-8.5 (+-0.1)

Reagent overconsumption

32-40% excess

< 5% excess

DO level (aeration tank)

0.8-6.2 mg/l

2.0-4.0 mg/l (stable)

Pollutant removal efficiency

82-91%

>98%

Blower energy saving

—

22% reduction

Published

2026-06-03