ОПТИМИЗАЦИЯ КЛИНИКО-ЛАБОРАТОРНЫХ ЭТАПОВ ИЗГОТОВЛЕНИЯ ОРТОПЕДИЧЕСКИХ КОНСТРУКЦИЙ С ПРИМЕНЕНИЕМ CAD/CAM-ТЕХНОЛОГИЙ
Keywords:
CAD/CAM, цифровая стоматология, ортопедические конструкции, интраоральное сканирование, цифровой оттиск, компьютерное моделирование, клинико-лабораторные этапы, ортопедическое лечениеAbstract
Современное развитие цифровой стоматологии способствует широкому внедрению CAD/CAM-технологий в ортопедическую практику. Традиционный способ изготовления несъёмных ортопедических конструкций включает значительное количество клинических и лабораторных этапов, каждый из которых может быть источником диагностических и технологических ошибок. Погрешности снятия оттиска, изготовления гипсовой модели, моделирования, литья и последующей коррекции конструкции способны приводить к нарушению краевого прилегания, окклюзионных взаимоотношений, контактных пунктов и эстетических параметров протеза. Использование цифрового сканирования, компьютерного моделирования и автоматизированного изготовления позволяет сократить количество промежуточных этапов и повысить воспроизводимость результата.References
1. Parize H., Tardelli J.D.C., Bohner L., Sesma N., Muglia V.A., Dos Reis A.C. Digital versus conventional workflow for the fabrication of physical casts for fixed prosthodontics: A systematic review of accuracy. J Prosthet Dent. 2022
128(1):25–32. doi:10.1016/j.prosdent.2020.12.008.
2. Bandiaky O.N., Le Bars P., Gaudin A., et al. Comparative assessment of complete-coverage, fixed tooth-supported prostheses fabricated from digital scans or conventional impressions: A systematic review and meta-analysis. J Prosthet Dent. 2022
127(1):71–79. doi:10.1016/j.prosdent.2020.09.017.
3. Saravi B., Vollmer A., Hartmann M., et al. Clinical Performance of CAD/CAM All-Ceramic Tooth-Supported Fixed Dental Prostheses: A Systematic Review and Meta-Analysis. Materials. 2021
14(10):2672. doi:10.3390/ma14102672.
4. Leitão C.I.M.B., Fernandes G.V.O., Azevedo L.P.P., et al. Clinical performance of monolithic CAD/CAM tooth-supported zirconia restorations: systematic review and meta-analysis. J Prosthodont Res. 2022
66(3):374–384. doi:10.2186/jpr.JPR_D_21_00081.
5. Schmidt A., Klussmann L., Wöstmann B., Schlenz M.A. The Complete Digital Workflow in Fixed Prosthodontics Updated: A Systematic Review. Healthcare. 2023
11(5):679. doi:10.3390/healthcare11050679.
6. Sarafidou K., Chatziparaskeva M., Chatzikamagiannis D., et al. Evaluation of marginal/internal fit of fixed dental prostheses after digital, conventional, and combination impression techniques: A systematic review. Eur J Oral Sci. 2022
130(6):e12902. doi:10.1111/eos.12902.
7. Vitai V., Németh A., Sólyom E., et al. Evaluation of the accuracy of intraoral scanners for complete-arch scanning: A systematic review and network meta-analysis. J Dent. 2023
137:104636. doi:10.1016/j.jdent.2023.104636.
8. Floriani F., Lopes G.C., Cabrera A., et al. Linear Accuracy of Intraoral Scanners for Full-Arch Impressions of Implant-Supported Prostheses: A Systematic Review and Meta-Analysis. Eur J Dent. 2023
17(4):964–973. doi:10.1055/s-0042-1758798.
9. Pachiou A., Zervou E., Tsirogiannis P., et al. Characteristics of intraoral scan bodies and their influence on impression accuracy: A systematic review. J Esthet Restor Dent. 2023
35(8):1205–1217. doi:10.1111/jerd.13074.
10. Gómez-Polo M., Donmez M.B., Çakmak G., Yilmaz B., Revilla-León M. Influence of implant scan body design (height, diameter, geometry, material, and retention system) on intraoral scanning accuracy: A systematic review. J Prosthodont. 2023
32(S2):165–180. doi:10.1111/jopr.13774.
11. Rexhepi I., Santilli M., D'Addazio G., et al. Clinical Applications and Mechanical Properties of CAD-CAM Materials in Restorative and Prosthetic Dentistry: A Systematic Review. J Funct Biomater. 2023
14.
12. Srinivasan M., Kamnoedboon P., McKenna G., et al. CAD-CAM removable complete dentures: A systematic review and meta-analysis of trueness of fit, biocompatibility, mechanical properties, surface characteristics, color stability, time-cost analysis, clinical and patient-reported outcomes. J Dent. 2021
113:103777. doi:10.1016/j.jdent.2021.103777.
13. Fueki K., Inamochi Y., Wada J., et al. A systematic review of digital removable partial dentures. Part I: Clinical evidence, digital impression, and maxillomandibular relationship record. J Prosthodont Res. 2022
66(1):40–52. doi:10.2186/jpr.JPR_D_20_00116.
14. Takaichi A., Fueki K., Murakami N., et al. A systematic review of digital removable partial dentures. Part II: CAD/CAM framework, artificial teeth, and denture base. J Prosthodont Res. 2022
66(1):53–67. doi:10.2186/jpr.JPR_D_20_00117.
15. Wang C., Shi Y.F., Xie P.J., Wu J.H. Accuracy of digital complete dentures: A systematic review of in vitro studies. J Prosthet Dent. 2021
125(2):249–256. doi:10.1016/j.prosdent.2020.01.004.
16. Kouveliotis G., Tasopoulos T., Karoussis I., Silva N.R., Zoidis P. Complete denture digital workflow: Combining basic principles with a CAD-CAM approach. J Prosthet Dent. 2022
127(4):550–555. doi:10.1016/j.prosdent.2020.12.024.
17. Valenti C., Federici M.I., Masciotti F., et al. Mechanical properties of 3D printed prosthetic materials compared with milled and conventional processing: A systematic review and meta-analysis of in vitro studies. J Prosthet Dent. 2024
132(2):381–391. doi:10.1016/j.prosdent.2022.06.008.
18. Avelino M.E.L., Costa R.T.F., Vila-Nova T.E.L., et al. Clinical performance and patient-related outcome measures of digitally fabricated complete dentures: A systematic review and meta-analysis. J Prosthet Dent. 2024
132(4):748.e1–748.e10. doi:10.1016/j.prosdent.2024.02.003.
19. Jafarpour D., Haricharan P.B., de Souza R.F. CAD/CAM versus traditional complete dentures: A systematic review and meta-analysis of patient- and clinician-reported outcomes and costs. J Oral Rehabil. 2024
51(9):1911–1924. doi:10.1111/joor.13738.
20. Mahato M., Hota S., Jain A., et al. Comparison of Conventional and Digital Workflows in the Fabrication of Fixed Prostheses: A Systematic Review. Cureus. 2024
16(6):e61764. doi:10.7759/cureus.61764.
21. Bessadet M., Drancourt N., El Osta N. Time efficiency and cost analysis between digital and conventional workflows for the fabrication of fixed dental prostheses: A systematic review. J Prosthet Dent. 2025
133(1):71–84. doi:10.1016/j.prosdent.2024.01.003.
22. El Osta N., et al. Time efficiency and cost of fabricating removable complete dentures using digital, hybrid, and conventional workflows: A systematic review. J Prosthet Dent. 2025. doi:10.1016/j.prosdent.2024.10.008.
23. Singh R., Mistry G., Choudhary M., et al. An update on CAD-CAM usage for removable partial denture fabrication: A systematic review. Bioinformation. 2024
20(12):1794–1799. doi:10.6026/9732063002001794.
24. Thu K.M., Molinero-Mourelle P., Yeung A.W.K., et al. Which clinical and laboratory procedures should be used to fabricate digital complete dentures? A systematic review. J Prosthet Dent. 2024
132(5):922–938. doi:10.1016/j.prosdent.2023.07.027.
25. Aljulayfi I.S., et al. The Potential of Artificial Intelligence in Prosthodontics: A Comprehensive Review. Med Sci Monit. 2024. doi:10.12659/MSM.944310.